Ames Tile Bliss Brick Glass Wall Tile 3"x12" - Earth Glass Tile

For SPECIAL prices, call us NOW at (604) 532-2211

Bliss Brick is an Ames Tile collection that takes the classic 3"x12" brick format in glass. These tiles are 8mm thick, have a V1 – Uniform Appearance variation rating, use 30 graphic faces, and carry a water absorption rating of 1 – Impervious. Made in China.

From the Ames Tile Bliss Brick collection: a 3"x12" glass tile in Earth. Each tile is 8mm thick with a V1 - UNIFORM APPEARANCE variation rating, so the overall installation reads as consistent rather than heavily varied. The tile uses 30 graphic faces and has a water absorption rating of 1 - Impervious, which appears in the manufacturer's specification as the "Impervious" category.

Glass tile care, from the TTMAC manual: clean with warm water and a pH-neutral cleaner specifically designed for glass tile, available from tile suppliers. Scrub the tile and grout joints with a nylon scrub brush or pad, following the cleaner manufacturer's directions. Rinse thoroughly with clean warm water and allow to dry; a second rinse may be needed to completely remove the cleaning solution. Microfiber cloths make cleaning easier because they collect dirt and release it when squeezed with water. Grout joints should be treated with a penetrating sealer if required — follow the grout manufacturer's recommendations. Epoxy grouts do not require a sealer.

Our Langley, BC store sells and installs this tile in Langley, Langley Township, Surrey, and Abbotsford.

Available to order through our showroom, serving Langley, BC and the surrounding area (Langley, Langley Township, Surrey, Abbotsford). Ask us for a sample or a measured quote.